LINE RADIUSGLOBAL.webp

A. Rigid Shaft Support Traditionally, plastic chemical pumps both have a single sided shaft help or only use plastic for a double-ended shaft assist. The downside with this is that beneath excessive temperature or pressure, the shaft assist weakens leading to shaft deflection and due to this fact vibrations leading elevated wear and reduced service life. The AME range includes a patented integral V form entrance support that’s a part of the metallic casing armour and then PFA lined. The rear of the shaft is supported within the PFA lined containment shell and strengthened by a metallic assist ring and high-strength carbon fibre composite cover. This superior design means an extended design life resulting in far less downtime and elevated productiveness.
B. Vacuum Resistant Lining The PFA lining is shaped instantly onto the metal armour and designed to ensure the PFA material remains adhered to the armour even beneath low absolute pressure.
C. Load Balanced Volute The casing volute is designed to have an evenly distributed hydraulic strain, providing a balanced radial loading on the impeller.
D/E. One piece, metal embedded impeller Traditionally, an ETFE or PFA magazine drive pump shall be fitted with a separate impeller and inside magnet. In เครื่องมือที่ใช้วัดความดันเลือด of excessive stress or temperature, the impeller can deform leading to damages and lowered efficiency. The AME pump range is constructed whereby the impeller and magnet capsule are formed as one piece which eliminates the potential of the impeller loosening. For additional operational stability and rigidity, a metallic construction is embedded from the magnet capsule to the impeller blade further increasing the pump’s operational life.
F. Simple Construction The stationary shaft design allows for a quite simple building which makes maintenance and repairs quite simple.
G. Reinforced Containment Shell The plastic containment shell is bolstered with a carbon fibre composite cover. There isn’t any eddy current loss, so no additional heating of the pumped chemical.
H. High Strength Magnetic Coupling Inner magnets are constructed from Samarium Cobalt (SmCo) in order to stand up to high operating temperatures with out experiencing demagnetization. High energy neodymium (NdFeB) is then used for the drive magnet to supply excessive torque transmission.
I. Back Pull-Out Simple and fast maintenance entry with out the want to remove the pump casing from the piping.
J. ISO Standardised Designed to ISO 2858, ISO 5199, ISO 15783, and EN 809 requirements.
The AME range are heavy-duty course of pumps designed with a metallic armour and excessive purity PFA-lining to deal with the hardest functions and for transferring high purity aggressive chemicals. Designed to ISO 2858 requirements, these magnetic drive pumps are constructed for dependable and leak-free operation in the most arduous of functions with temperatures <150°C thanks to the patented structural design.
Would you like to discuss further? Then call us on 01425 627700 or get in touch on info@crestpumps.co.uk.
Share